CSB-20

Bi-metal Steel Backed Bronze with POM Bearing Bushing

Features

Suitable for rotating and oscillating movements, less maintenance requirements due to the long lubrication intervals, lower wear, lower susceptibility to edge loading, no absorption of water and therefore no swelling, good damping behaviors, good resistance to shock loads.

 

For more information on our sliding bearing bushing materials and applications download our catalogue

“CLICK-HERE to DOWNLOAD CATALOGUE”

You can also contact our global sales team by sending a message online through our website

“CLICK-HERE to SEND A MESSAGE”

 

Structure

1. POM thickness 0.30~0.50 mm. It provides high wearresistance and low friction even with only minute volume oflubricant are supplied, this bearing surface carries a pattern of circular indents which should be filled with grease on assembly of the bearing.
2. Sintered bronze powder thickness 0.20-0.35mm. A special composition of powdered copper is thermally fused to the steel backing. This contact layer acts as an anchor for the PTFE layer and conducts the thermal build up away from the bearing surfaces.
3. Low-carbon steel.Setting the foundation of the bushings, the steel back provides exceptional stability,load carrying and heat dissipation characteristics.

Raised Image

Tech. Data

Raised Image

Typical Applications

Recommended for applications involving intermittent operation or boundary lubrication... Automotive: suspension joints, kingpin assemblies and stub axles of trucks, automobile driving joint hinges, steering and other linkages, articulation joints, rear chassis hinges, fair leader rollers... Machine tool building industry: spindles in drill, grinding, and milling machines, ram guide plates in multi-ram presses... Agricultural equipment: gearbox, clutch, bale trips and wheel caster swivels for bale accumulators, front axle pivot bearings, steering idler box bearings and kingpin bearings for harvesters... It is especially well-suited for applications where lubricant can not be supplied continuously or repeatedly. See more about bi-metal bushing / sliding bearing applications "CLICK HERE"

Size